|
To place your order by phone call: 1-800-385-2910
Browse by Author/Artist: 0 A B C D E F G H I J K L M N O P R S T U V W X Z
You are here: Car Audio > Amplifiers > Kicker 04KX250.2 2 Channel Stereo Amplifier Model: 04kx250.2
Kicker |
Kicker 04KX250.2 2 Channel Stereo Amplifier Model: 04kx250.2
General Specifications
Number Of Channels: 2
Number Of Channels: Common name for a complete amplifying stage in any audio amplifier. Most amplifiers are denominated as 1, 2, 4, 5, or 6 channel units. Each of these is a discrete audio amp on its own, capable of taking a small line signal input and amplifying it sufficiently to be heard on an appropriate speaker. Some amplifiers are capable of bridging two channels together, to form one channel of double the power of each separately. The manufacturer's instructions differ widely on how to accomplish this, and each must be followed exactly.
Maximum Power: 250 Watts
Maximum Power: The amount of power a speaker is estimated to handle during a brief high-intensity musical burst. Since this can vary with both frequency and amplitude, it is a much less accurate way to judge speaker durability and performance than RMS.
Low Frequency response: 20 Hz
Frequency Response: The range of frequencies that a speaker will reproduce (lowest frequency to the highest). While the optimal normal is 20 - 20,000 Hz (Hertz), the range of human hearing for individuals is often much more restricted. A good full-range speaker system however, will reproduce as much of this range as possible in order to cover all variations. Individual Drivers are limited to reproducing only that part of the spectrum for which they were made, so their response will be limited, but still a necessary point to consider when designing a complete sound system.
High Frequency Response: 20000 Hz
Frequency Response: The range of frequencies that a speaker will reproduce (lowest frequency to the highest). While the optimal normal is 20 - 20,000 Hz (Hertz), the range of human hearing for individuals is often much more restricted. A good full-range speaker system however, will reproduce as much of this range as possible in order to cover all variations. Individual Drivers are limited to reproducing only that part of the spectrum for which they were made, so their response will be limited, but still a necessary point to consider when designing a complete sound system.
Built In Crossovers: Yes
Crossover: A device or passive circuit used in systems with separate tweeter and/or midrange Drivers. It Rolls Off frequencies above and below certain points in the range, to allow the sound to be tailored for the specific driver to which it is sent. Most speakers have crossovers that consist of passive elements such as capacitors, coils, and resistors to separate the various frequencies. In a bi-amped or multi-amped system, the crossover is an active device that feeds the various frequency bands to the inputs of the amplifiers that operate the individual drivers.
Channel Separation: Yes
Features
Power (WATTS/CHANNEL), 2 Ohm Stereo: 125W x 2
Power (WATTS/CHANNEL), 4 Ohm Bridged Mono: 250W
Remote Bass Control: NO
Fan Cooling: No
Length With Shroud: 16"
Width With Shroud: 10"
Height With Shroud: 2 1/2"
Frequency Response: 20Hz-20kHz; +0, -1dB
Input Sensitivity: High Level 340mV-10V, Low Level 170mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re:rated power
Active Crossover: 12dB/Octave, variable 50Hz-200Hz, selectable high pass, low pass, or all pass
KICKBass Boost: Variable to +18dB, centered @ 40Hz Pass-Thru RCAs
Weight: 17 lb
Car Audio
List Price: $299.99 Our Price: $199.99
You save: $100.00 (33.3%)
Ships within 1 week
|
|
|
Testimonials |
I enyoyed the product
that I bought thru garinet.com. I received the product on time as it was
promised, that is what I like.
Enrique Velasquez
|
|
|
New releases in Amplifiers...
|
|
See also in Amplifiers...
|
Kicker 04KX250.2 2 Channel Stereo Amplifier Model: 04kx250.2 - Kicker
|
|
Our Price: $199.99
|
|
|
|
Kicker 04KX350.4 90W x 4 Car Amplifier Model: 04kx350.4 - Kicker
|
|
Our Price: $249.99
|
|
|
|
|
|